#Sofortbild vs kightroom classic software#
#Sofortbild vs kightroom classic code#

Get the Code here - carlosgs/Cyclone-PCB-Factory Ĭyclone PCB Factory: 3d printable circuit board millĬyclone PCB Factory: 3d printable circuit board mill carlosgs/Cyclone-PCB-Factory Under nocircumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages. This hardware/software is provided 'as is', and you use the hardware/software at your own risk. You can register and see by yourself.Īll other development present on Cyclone has nothing to do with Panda and is not related to the Panda project. Please note I have taken screenshots of the post that are on the closed G+ Panda community ( ). List of CNC endmill types: David Martin.I decided to use the base as a main structural part instead. Regarding the woodbase: Guillermo Welch always contemplated the possibility of attaching the machine (optionally) to a woodbase.Using gears to drive the X-Y axes: Guillermo Welch.X carriage rod distribution: César Augusto Fernández Cano claims Cyclone's X axis is a derivate of his concept:.Let's design a 3D-printable CNC for PCB milling, it will be named Panda: Guillermo Welch (mid-December, via Google Talk).Here is the credit for the ideas that were used:

This is from December 2012 to mid-February 2013. The origin of Cyclone took place while I was inside the Panda CNC community ( ).

'PCB Machining Vise' by Forgetful_Guy ( ).

Write.scad (and DXF fonts) by HarlanDMii ( ).

'Carro Z para Cyclone CNC mill intended for PCB' by Quim ( ).

'Spindle mount for ShapeOko' by Misan ( ).

'Minimal footprint friction-fit LM8UU holder' by thantik ( ).

'Parametric openscad beveled cube' by Obijuan ( ).

'Linear actuator concept for CNC machines' by Carlosgs ( ).

Also, thanks to Obijuan ( ) for naming the machine Cyclone :)ĭerived from / we have used / inspirational.

This design woudn't have been possible without the encouragement of the Panda CNC community ( ).

Z axis concepts by Quim Borras and the spindle motor holder by Misan were really useful!! Also, Diego Viejo's machine was of great inspiration for the Z axis ( ) Thank you all!!.

License: Attribution - Share Alike - Creative Commons ( ) Authors:

onshouldersTv: Open Source Circuit Boards at Home.

#Sofortbild vs kightroom classic software#

Here is a compilation of links that have inspired the software controller (specifically the Z probing technique): Bed leveling will be done with probing and an appropriate software.Parts are designed to be printable with the small volume of a Printrbot Jr.Desired working range of >=100mm for the X axis and >=160mm for the Y axis.Finally it will be using a proper spindle (check the BOM for the reference). As shown in one of the pictures, a cheap dremel-like drill has nice bearings and is a good option as the main tool.Using a thick wood piece as the main base.TODO: Add general hardware, motors and electronics to the list. Open Source SMT Pick and Place Hardware and Software via Marcos Villacampa Water-cooled spindle motors! via Marcos Villacampa We could use a thermistor to measure the temperature of the spindle motor: this way the software could 'let it rest' when it gets too hot.No news, it is Marlin with support for G30 probing command.

Added the python probing script (v0.1) and Octave/Matlab visualizer.

First Z probing results are promising, read: and.

Note: The timeout for commands of the edge needs to be increased, since the moves are really slow.

v0.9.6b has a robust Y axis motor stand (improvement suggested and tested by Yopero), and the Z carriage now shows the name of the machine (how cool is that? :P).

v0.9.7 has an improved Z carriage: uses much less plastic, it holds the spindle tightly and leaves more metal surface exposed for better cooling.

Note: The linear bearings of the X carriage must be glued in place (use epoxy or similar) since vibrations produced by the spindle motor move the bearings out of place.

Keep motors always on, in order to do homing only once each milling session.

Fix bug in GcodeParser.py that doesn't mind the depth of the cuts, this affects only when cutting the edges with >1 passes.

Export Z probing results to a standarized file.

Add Endstop holder files (same of Prusa/Mendel).

Reinforce screw holders in the Z axis parts.

!forum/cyclone-pcb-factory Wiki entry on If you are interested in this project, please consider joining our mail list: The first 3D-printable (Rep-Rap alike) CNC machine, intended for PCB manufacture. That could really Transform your PCB Diy Work. Here's a Great Looking Open Source Project.